"The Gel" polish Tutorial

1. Sanitize the hands with ALCOHOL POWER SPRAY.

2. Prepare the nails, remove the natural shine and clean with ALL IN ONE PREP+CLEAN.

3. Apply the ULTRABOND PRIMER and allow it to air-dry for 60 seconds.

4. Apply the BASE COAT 2 IN 1 and cure for 60 seconds in LED light or 120 seconds in UV light*.

5. Apply a coat of THE GEL POLISH, taking care to seal the edge of the nail, and cure for 60 seconds in LED light or 120 seconds in UV light*. Apply a second coat of THE GEL POLISH and cure for 60 seconds in LED light or 120 seconds in UV light*.

6. Apply a coat of TOP COAT, taking care to seal the edge of the nail. cure for 60 seconds in LED light or 120 seconds in UV light*.

7. Remove inhibition (or sticky) layer with ALL IN ONE EXTRA GLOW.

*Cure time may vary depending on the equipment used.

Removal

For a simple and safe removal of THE GEL POLISH, we recommend using the ALL IN ONE REMOVER.

True Pure polish Tutorial

1. Sanitize the hands with ALCOHOL POWER SPRAY.

2. Prepare the nails, remove the natural shine and clean with ALL IN ONE PREP+CLEAN.

3. Apply the TRUE PURE BASE COAT and cure for 60 seconds in LED light or 120 seconds in UV light*.

4. Apply a coat of TRUE PURE COLOR, taking care to seal the edge of the nail, and cure for 60 seconds in LED light or 120 seconds in UV light*. Apply a second coat of TRUE PURE COLOR and cure for 60 seconds in LED light or 120 seconds in UV light*.

5. Apply a coat of TRUE PURE TOP COAT, taking care to seal the edge of the nail. cure for 60 seconds in LED light or 120 seconds in UV light*.

6. Remove inhibition (or sticky) layer with ALL IN ONE EXTRA GLOW.

*Cure time may vary depending on the equipment used.

Removal

For a simple and safe removal of TRUE PURE, we recommend using the ALL IN ONE REMOVER.

One Bottle Builder Gel Tutorial

PREPARATION:

1. Clean the hands with the ALCOHOL POWER SPRAY.

2. Prepare the nails, remove natural shine, and clean with the ALL IN ONE PREP + CLEAN.

3. Apply the ULTRABOND PRIMER and allow to air-dry for 60 seconds.

CONSTRUCTION:

1. Apply a thin layer of ONE BOTTLE BUILDER GEL 3IN1 to create a base. Seal the edge of the nail. Cure for 60 seconds in LED light or 120 seconds in UV light*.

2. Apply a moderate amount of ONE BOTTLE BUILDER GEL 3IN1 , in the centre of the nail to make the construction, and extend it, avoiding contact with the cuticle. Cure for 60 seconds in LED light or 120 seconds in UV light*.

3. Remove inhibition layer with ALL IN ONE PREP + CLEAN.

4. Work the constructed nail with the NAIL FILE or a nail drill.

5. Clean nail with the ALL IN ONE PREP + CLEAN.

FINISHING:

1. Apply a layer of ONE BOTTLE BUILDER GEL 3IN1. Seal the edge of the nail. Cure for 60 seconds in LED light or 120 seconds in UV light*.

2. Remove sticky layer with the ALL IN ONE EXTRA GLOW.

* The cure time may vary depending on the equipment used.

Builder Gel Tutorial

PREPARATION:

1. Clean hands with the ALCOHOL POWER SPRAY.

2. Prepare the nails, remove natural shine, and clean with the ALL IN ONE PREP + CLEAN.

3. Apply the ULTRABOND PRIMER and allow to air-dry for 60 seconds.

CONSTRUCTION:

1. Apply a thin layer of HARD GEL 2IN1 to create a base. Seal the edge of the nail. Cure for 60 seconds in LED light or 120 seconds in UV light*.

2. Apply a moderate amount of HARD GEL 2IN1, in the centre of the nail to make the construction, and extend it, avoiding contact with the cuticle. Cure for 60 seconds in LED light or 120 seconds in UV light*.

3. Remove inhibition layer with ALL IN ONE PREP + CLEAN.

4. Work the constructed nail with the NAIL FILE or a nail drill.

5. Clean nail with the ALL IN ONE PREP + CLEAN.

FINISHING:

1. Apply a layer of ALL IN ONE TOP COAT. Seal the edge of the nail. Cure for 60 seconds in LED light or 120 seconds in UV light*.

2. Remove sticky layer with the ALL IN ONE EXTRA GLOW.

* The cure time may vary depending on the equipment used.

Pro Extend Tips Tutorial

PREPARATION:

1. Choose the ideal tip size for each nail.

2. Use the buffer or drill on the interior of the tip, in the matte zone.

APPLICATION:

3. Prepare the nails, remove the natural shine, and clean with PREP+CLEAN.

4. Apply the PRIMER and let it air dry for 60 seconds.

5. Apply a layer of ONE BOTTLE BUILDER GEL CLEAR to the interior of the tip, in the matte zone.

6. Position the tip correctly on the nail and cure* under the PRO EXTEND LAMP.

7. Repeat the procedure on the remaining nails.

8. Cure* both hands under the A.LAMP PRO.

9. Use the 100/180 BUFFER to remove the shine from the tips.

DECORATION:

10. Apply a layer of GEL POLISH and cure*. Apply a second layer of GEL POLISH and cure*.

11. Apply a layer of TOP COAT and cure*.

12. Remove the inhibition layer (sticky residue) with EXTRA GLOW.

* for 60 seconds under LED light or 120 seconds under UV light. Cure time may vary depending on the equipment used.